Github Devices Community Docs Blog

Basic WeMos D1 RF receiver

Gateways Radio frequencies gateways 315mhz, 433mhz, 868mhz
#1

If you’re like me, and want your RF receiver to be isolated (no other components on) for receiving rf switches, rf fire alarm, rf flood sensors etc., I made a simple 3d printable design for a WeMos D1 and rf receiver (SRX882).
It prints in 2 parts, and the lid stays in place by the micro usb cable’s pressure.
The led is visible through the thin wall.
If anyone’s interested I’ll upload the STL files:

IMG_20191120_153146_BURST9
IMG_20191120_153146_BURST91508×2016 1.19 MB
IMG_20191120_154742
IMG_20191120_1547421508×2016 1.32 MB
IMG_20191120_151737
IMG_20191120_1517371508×2016 1.01 MB
IMG_20191120_151726
IMG_20191120_1517261508×2016 1.42 MB

#2

Tweaked it a bit and added a small button for resetting without using a paper clip.

IMG_20191120_182113
IMG_20191120_1821133016×4032 3.88 MB
IMG_20191120_181108
IMG_20191120_1811082016×1508 1.39 MB

1 Like
#3

Hi i want build this too. Can you give me the STL Files and a small manual for build it too. Thank you a lot