I’ve just bought a ESP32-S3-DevKitC-1 Board. I’ve had a few other binaries running on it successfully (e.g., tasmota, using the tasmota web installer), so the board is fine. But I can’t manage to get Theengs installed and running. My first attempt was to use the web installer (i.e., (Option 1) Uplo…

Can you try the development version Theengs OpenMQTTGateway DEVELOPMENT SHA:0d338c TEST ONLY One gateway, many technologies: MQTT gateway for ESP8266 or ESP32 with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, LoRa, beacons detection, mi flora / mi jia / LYWSD02/ Mi …

The dev version worked and I configured the gateway successfully. Many thanks for the prompt response.

BTW, was I passing the wrong arguments into the command-line esp flash tool? I want to upload my own binary so that I can enable AWS support. Thanks.

Using Platform IO would be the easiest if you want to configure the board for AWS. Here are the parameters used by the web uploader for binary upload. 1technophile/OpenMQTTGateway/blob/gh-pages/dev/firmware_build/esp32s3-dev-c1-ble.manifest.json { "name": "OpenMQTTGateway", "new…

Saw the S3 listed, was hoping. But mine is a waveshare ESP32 S3 Zero. No joy. +1 for dev when you see a chance

ESP32 S3 should work from the development branch Theengs OpenMQTTGateway DEVELOPMENT SHA:e390ac TEST ONLY One gateway, many technologies: MQTT gateway for ESP8266 or ESP32 with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, LoRa, beacons detection, mi flora / mi jia /…

Esp32-s3-c1 continually resets

Hardware

Theengs Plug Theengs Bridge

Software

Mobile App OpenMQTTGateway Gateway

Core

Decoder Web Parser