Back looking at this issue again.
I’ve set this flag in the build. ‘-DPUBLISH_UNPARSED=true’
and when I see the Steelmate getting decoded by a raspberry pi running rtl_433 I see the following debug output.
rtl_433_ESP(6): Unparsed Signal length: 6001, Signal RSSI: -42, pulses: 56
rtl_433_ESP(6): RAW (6001): +0-80+48-51+51-59+47-51+52-51+51-51+51-51+52-51+59-106+102-47+52-51+51-48+51-51+51-53+57-44+51-114+43-51+53-50+110-106+47-48+51-51+48-51+110-106+106-47+121-115+57-58+110-48+51-51+51-48+51-51+52-53+56-44+59-47+51-52+51-51+51-110+47-51+48-51+110-48+51-109+107-43+70-62+55-58+59-55+55-47+51-52+51-53+46-51+51-51+59-47+51-52+47-51+110-106+106-106+48-325+0-0
T: isAdupl?
T: no pub. dupl
rtl_433_ESP(6): Unparsed Signal length: 6000, Signal RSSI: -57, pulses: 56
rtl_433_ESP(6): RAW (6000): +51-44+51-51+59-47+52-51+51-51+51-52+51-51+59-43+51-52+58-106+103-47+51-48+51-51+59-44+51-51+59-44+51-113+44-52+50-52+109-106+48-48+51-51+51-48+110-105+106-48+121-113+59-54+110-55+48-51+51-48+51-51+58-44+52-51+58-44+51-59+48-51+51-109+48-51+51-54+104-47+52-109+106-44+69-63+55-58+59-55+47-59+50-48+52-51+47-51+52-51+58-48+51-51+52-51+109-107+106-47+62-0
T: isAdupl?
T: no pub. dupl
rtl_433_ESP(6): Unparsed Signal length: 6000, Signal RSSI: -58, pulses: 56
rtl_433_ESP(6): RAW (6000): +0-45+59-48+51-51+51-48+51-51+51-59+47-52+51-51+51-51+51-110+106-48+47-52+51-52+50-51+51-53+50-51+51-110+48-51+53-49+110-106+44-51+48-51+51-51+110-106+106-44+121-117+54-63+106-47+59-47+48-51+51-52+51-51+51-61+41-52+58-48+49-49+52-113+48-49+49-52+109-48+51-110+106-44+69-55+66-55+58-55+47-59+47-53+46-52+51-51+51-52+58-47+51-52+48-58+106-102+111-101+44-0
T: isAdupl?
Seems the Steelmate isn’t getting decoded with my OpenMQTTGateway and rtl_433_ESP build.