Battery info of Mi Flora sensors

[DigiH]

I suppose you are talking about your pink Mi Flora HHCCJCY10 version, for which we collaborated on creating a decoder, correct?

Feature request : HHCC Flora Care Senosr Pink version Tuya

Pressing boot at upload solved upload problem tnx. i am testing sensors now data is coming now in two packets with mqtt explorer id, name ,rssi packets are coming every minute sensor data packets are coming every 3 minute or so , but sensor values ​​do not change very often with mqtt , values are changing about every 40 minutes or so but with sensor native app “smart life” values are changing about every 3 seconds. could it be that the sensors are bluetooth5 but the esp32 i am using ope…

The decoder hasn’t been touch at all since the initial submission, so it should be working the same as in your final results in the above thread.

Did you possibly update the firmware on the Mi Flora?

Can you double check with MQTT Explorer again, to see what the actual decoded messages look like?