Hi. I’ve just succesfully deployed TheengsGateway on Home Assistant. All works fine but I’ve noted that using an MQTT client like MQTT Explorer it receive updates (like RSSI, name or ID) from BLE devices about 2 o 3 times per minute. At the same time, using a BLE scanner like nRF Connect I see th…

Hello, Could you try with these settings and restart: [image] Just tried on my side, and I see continuous updates coming

Hi 1technophile, thanks for you reply. Ive tried your suggestion but update continues to be every 10 or 20 secs. I’ve tried even with 5/1 but with same results: [2023-01-17_182109]

[image] m4biz: every 10 or 20 secs. That’s already a progress ! What use case do you need to cover to have less than 20s between updates?

Hi. I’m developing an interface that that for the most of time is slleping and only for few seconds per minute is awake https://www.hackster.io/m4biz/home-assistant-deep-ble-relay-low-energy-2632ca For this reason I need real time communicatio with BLE device.

I’ve tried, but nothing changes: [2023-01-17_182109]

On this window, 10:45:00 to 10:45:30, when was your device broadcasting versus what has been caught by the gateway ?

This screenshot is the ouput of MQTT explorer that is connected to Home Assistant that hosts Mosquitto Broker and TheengsGateway: [2023-01-21_123043] [2023-01-21_123144]

[image] 1technophile: On this window, 10:45:00 to 10:45:30, when was your device broadcasting versus what has been caught by the gateway ? Sorry, maybe I was not explicit enough. What are the expected readings from the screenshots, when does your device broadcast during this time window ? A…

@m4biz , could you install the nRFConnect app on your phone and view the device there. It should show you the Advertising Interval for your device. What does it say for ESP32-BLE-Nr3? Could it be that the interval is ~ 10000 ms?