Marquant weather station

1technophile · August 18, 2023, 9:37pm

Seems to be supported by RTL_433 as:
[215] Emax W6, rebrand Altronics x7063/4, Optex 990040/50/51, Orium 13093/13123, Infactory FWS-1200, Newentor Q9, Otio 810025, Protmex PT3390A, Jula Marquant 014331/32, Weather Station or temperature/humidity sensor

It uses FSK modulation which is not supported out of the box with OpenMQTTGateway with v1.6.0

github.com

merbanan/rtl_433/blob/master/src/devices/emax.c

/** @file
    First version was for Altronics X7064 temperature and humidity sensor.
    Then updated by Profboc75 with Optex 990040 (Emax full Weather station rain gauge/wind speed/wind direction ... ref EM3390W6 )

    Copyright (C) 2022 Christian W. Zuckschwerdt <zany@triq.net>
    based on protocol decoding by Thomas White

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
*/

#include "decoder.h"

/**
Fuzhou Emax Electronic W6 Professional Weather Station.
Rebrand and devices decoded :
- Emax W6 / WEC-W6 / 3390TX W6 / EM3390W6 / EM3551H
- Altronics x7063/4

This file has been truncated. show original

Nevertheless, if you are open to tinkering and building your own firmware, you can do it as done below:

If not a further version of OMG will support FSK out of the box