OMG V0.9.8 broker password change

[DigiH]

Hi @Hobby

Have a look at

System commands (ESP only) | OpenMQTTGateway v1.7.0

but this should also be changeable in the WebUI.

@Hobby

I’ve tried to flash a OMG V1.7.0 with IR and RF databases on a spare ESP32 but was unsuccessful after more than 20 attempts so I stayed with V0.9.8,

Did you create your won environment for this IR and RF gateway, or was there a pre-built one available for V0.9.8?

OK, just saw your older posting

RF + IR gateway not possible anymore in ESP32?

Hi, I am using two IR+RF gateway’s with OMG version 0.9.16 for almost 2 years now and decided to upgrade one to OMG 1.6.0 or 1.7.0 but do not get it working anymore. I have tried >10 times with erasing and flashing ESP Easy (to check if the EPS32 still worked) but was not able to flash OMG anymore. Hardware: ESP32 WROOM 32 + CC1101 module and IR receiver/transmitter. 1 PROBLEM reported in User_config.h about line 197: const char* certificate PROGMEM = R"EOF(" expected a ‘;’ C/C++(65) [Ln 1…

All the different RF options, especially the rtl_433 you have included, will not all work together on top of IR as well, due to memory restrictions with the new OMG version. Do you really require all of the RF modules for all your devices, and do you switch between them constantly via MQTT commands?